How Strong Is Cerakote?

What’s better DuraCoat or Cerakote?

DuraCoat – Weighing Your Options For the Best Firearm Finish.

Cured Cerakote absolutely beats cured DuraCoat in every measurable respect with regard to finish quality, abrasion resistance, and overall toughness.

….

How long is Cerakote good for?

12 monthsDetails for Cerakote Storage We warranty all Cerakote products for 12 months from the date of shipment. To ensure you receive the highest quality product, every lot number of Cerakote gets tested for consistency and goes through our Quality Control Lab for review of Color, Gloss, and Viscosity.

Does Cerakote stop rust?

Likewise, durable coatings such as Cerakote Coatings can form a passivized or otherwise near-impermeable layer on the surface. This keeps rust at bay and can even act as a semi-permanent lubricant.

Is Cerakote more durable than anodizing?

80% Arms offers beautifully finished cerakoted lowers in a variety of colors. More durable than anodizing, this is the highest end finish you can apply to your rifle. Cerakote consistently wins all durability, lubricity, heat resistance, and endurance tests.

Why is Cerakote so expensive?

The reason it’s so expensive is because it is really hard and requires tons of time to do properly. I can guarantee you that the $250 they are asking for each job won’t even properly cover their time. We pretty much “donate” lots of time to each cerakote job we do.

Is Cerakote permanent?

Cerakote requires many hours of prep, spray, and cure time before the firearm can be used. It is a permanent application that cannot be reversed so easily but will endure a long time.

How good is Cerakote?

Developed by NIC Industries, Cerakote is a thin-film ceramic coating that offers a hard finish that is resistant to abrasion, corrosion and chemicals—and looks great at the same time. … Also, for obvious reasons, this coating needed to be highly resistant to corrosion as compared to more delicate finishes such as bluing.

What is the best firearm coating?

The most durable gun finishes are Quench Polish Quench, Chroming, Nickel Boron, Duracoat, Cerakote, and Anodizing. The least durable is bluing but is one of the most attractive tied with chroming and plating. Duracoat is by far the most cost effective and easiest to apply, and is also extremely durable.

Is Cerakote better than bluing?

Cerakote is also a more effective barrier against oxidation and corrosion than bluing.

Is Cerakote better than nitride?

Cerakote vs. Nitride The Corrosion Resistance King In a head-to-head test, Cerakote was put up against Nitride in a salt chamber to see which would be the most corrosion-resistant. … As the test went on, it took a whopping 1,206 hours to show any signs of corrosion.

Is Cerakote stronger than powder coat?

A similar market product, powder coating, must be applied at a minimum of 2/1000” (2 mil). Cerakote, on the other hand, thrives around half that application (1 mil). Half. … And while powder coating is just 1 mil thicker than cerakote, we’d never comfortably prescribe a powder coat to any firearm.

Does Cerakote scratch easily?

Cerakote® is a ceramic polymer based proprietary formulation that offers industry-leading durability, hardness, scratch resistance, corrosion resistance, flexibility, heat, and chemical resistance. Cerakote® can be applied to most substrates including metals, plastics, polymers, composites, hydrographics and PVD.

Does Cerakote add weight?

Does cerakote add any weight comparing to just hard coat anodized surface? It’s only . 001″ thick. Any weight added is negligible.

How thick is Cerakote?

a 1 milMost Cerakote applications, especially on firearms, involve a coating and curing process that leaves you with a 1 mil final thickness on top of the part, though this can be as low as a quarter of a mil, depending on the Cerakote Series. While this coating is thin, it will affect the fit and finish of the firearm.

Does Cerakote wear off?

All coatings and bluing will wear off.

Do you bake Cerakote?

For optimal cure, place the coated pieces in a 250°F oven and cure for 2 hours. For a quick cure, 1 hour at 300°F is sufficient. If the substrate material is heat-sensitive (such as plastic or wood) then a 200°F cure for 2 hours is adequate.

What happens if you don’t bake Cerakote?

If you don’t heat it it won’t cure properly. You can buy an air cure like Duracoat or Gun cote air dry. … The instructions say that some material (polymer) only heat to 175 degrees.

How does Cerakote hold up?

Cerakote is very durable and very hard. Using it on frames is fine and it may actually smooth up the action. The sandblasting removes the extra thickness from the piece being coated.

Can you Cerakote over bluing?

Bead/sand blasting gives it surface texture for the Cerakote to stick to. If you spray it on a shiny blued rifle it won’t stick. You don’t have to to get 100% of the bluing off but the bluing that’s left will offer no protection to the firearm.

Is Cerakote bad for your gun?

If it’s a regular modern gun, and you want it to look a certain way, there is nothing wrong with cerakote. It’s a good finish. It’s durable and it will prevent corrosion.

Can you Cerakote a barrel?

Add A Cerakote Finish to your barrel. Cerakote Firearm Coatings improve performance and reliability over conventional finishes. … Available in a wide selection of colors, let McGowen Precision Barrel transform your new barrel with professionally applied Cerakote protection.